Helpdesk: 01924 890099

Yokomo YD2-SXII "Special Edition Red" RWD Drift Car Kit YD2

#DP-YD2SX2R Product Description

YOKOMO YD2-SXII "SPECIAL EDITION" RED RWD DRIFT CAR KIT YD2 #DP-YD2SX2R

With the overwhelming rear traction of the high mount motor weaponry, the YD-2S series that dominates the drift competition around the world. Among them, the YD-2SX which is the top end model is equipped with a newly developed round - ly slide rack, and "YD-2SXII" which becomes an instant fighting machine at the world level exactly appears!

Based on the luxurious graphite luxurious main chassis, various aluminum / graphite options are installed. It is also possible to change the balance of weight and rigidity, and it is possible to draw machine characteristics according to various driving styles. Aluminum parts such as front bulkhead and shock tower are given a bevel edge treatment of black alumite and are perfect for luxury. It is exactly the finish that can be said as "the supreme machine".

YD-2SX has now renewed with new developed curved slide rack system, it is exactly an out of box ready for the battle in the world, new birth of "YD-2SXII !!!

Based on luxurious graphite luxurious main chassis, various aluminum / graphite options There is a possibility to change the balance of weight and rigidity of the car, and it is possible to draw the machine according to various driving styles. Aluminum It is exactly the finish That can be said as "the supreme machine".

Main Features

  • Total Length: 425mm 
  • Width: 198mm 
  • Wheel Base: 256mm 
  • Secondary Reduction Ratio: 1: 2.6 
  • All Equipment Weight: 1500g 
  • Fully Limited Red Alumite Version 
  • Newly Designed Roundly Slide Rack Steering System 
  • High Mount Motor  
  • 4 Gear rear transmission 
  • Newly designed sealed gearbox 
  • Aluminum front bulkhead 
  • Four wheel independent independent wishbone suspension 
  • High performance super low friction aluminum height adjustable oil damper 
  • Graphite main chassis 
  • Graphite chassis plate 
  • Aluminum front / rear shock tower 
  • Motor position 7-position adjustment type aluminum special motor mount 
  • 49mm bone rear universal shaft 
  • narrow scrub knuckle 
  • large rear diffuser

Specifications

  • Length: 425mm 
  • Width: 198mm 
  • Wheelbase: 256mm 
  • Second reduction rate: 1: 2.6 
  • Over all weight: 1500g
  • Special limited red alumite version 
  • NEW !! Curved Slide Rack 
  • High mount motor  
  • 4 Gear rear transmission  
  • New design, Sealed gear box 
  • Aluminum front bulkhead 
  • 4 wheel independent double wishbone suspension  
  • SLF aluminum big bore oil dumber 
  • Carbon graphite main chassis  
  • Carbon graphite chassis plate 
  • Aluminum front / rear shock tower 
  • Adjustable special aluminum motor mount system 
  • 49 mm bone rear universal shaft 
  • Narrow scrub steering block
  • Wide / Narrow rear diffuser
  • Front suspension arm is a newly designed short type. We refined the position of the steering stopper and realized the overwhelming cutting angle.
More steering angle due to new Short Suspension Arm which has redesigned for prevent from interference with wheels, besides the location of steering stopper had also refined.

The slide rack adopts a roundly (curved) shape derived from repeated test runs. It eliminates the tie rod interference at the maximum turning angle which was a straight type negative point, even with a deep drift angle, it is highly controllable, allowing traveling with a margin. Also, by slanting the body of the slide rack forward, the angular change of the tie rod with respect to the horizontal plane at the time of steering operation is suppressed, and the cornering characteristic is finished so as to have stable cornering characteristics over the entire cutting angle.

The curved slide rack It is the drift to feel more freedom in deepest angle drifting moment. The rack is installed with a forward tilt angle in order to reduce the bump 
steer, which is the The body roll and suspension motors will not influence the car to turn more sharply than the driver anticipates.

Inverted servo mounted looking for the ideal steering feel. Front bulkhead and servo mount are made of aluminum, and high response is realized.

Inverted servo in searching for the ideal steering feel. Front bulkhead and servo mount are made of aluminum, and high response is achieved.

Although the corresponding battery is only short Li-po battery, you can select various battery loading style according to fixed position of battery stopper. In addition to the horizontal installation of the battery, in addition to the vertical installation, you can select from three positions in front and behind in the case of horizontal placement, front and rear traction etc. can be adjusted by weight balance change.

The layout will be Vertical, Horizontal Front / Mid / Rear in order to complete to fine tuning on weight balance and forward / backward traction.

By changing the fixing position of the motor mount plate, the motor can be selected from 7 positions in the front and back. This makes fine adjustment of the weight balance possible, it is possible to acquire the optimal balance according to the road surface to travel.

Since the motor layout can be changed by 7 rotate positon at motor mount plate, the weight balance of car will be also adjustable to find out the best setting for keeping supreme angle and speed in any kind of slippery surface condition.

The short arm of the rear suspension brings the traction performance that maximizes the characteristics of the drift tire. Even with fewer roll motions, the load is more likely to be applied, and the feeling of grip improves throughout the corner. In addition, the rear hub carrier also features a new model that corresponds to the upper arm. Even when using a tire with a flat tread surface, it is a setting that can effectively utilize the ground contact surface by camber change.

Even with fewer roll motions, the load is more likely to be applied, and the feeling of grip improves throughout the corner. In addition, the rear Even when using a tire with a flat tread surface, it can effectively utilize the ground contact surface by camber change.

Super low friction shock which applied Kashima coat treatment to aluminum shock cylinder and reduced the frictional resistance with piston to the limit. For on-road use, we adopted a class maximum capacity 11.2 mm big bore cylinder. In the case of resin tires used in drift driving, minor vibration received from the road surface is a major factor of lowering tire grip, but it also absorbs vibrations with a super low friction shock with increased shock capacity, maximizing grip I will earn. Since it is a height adjustment type, you can change the height of the car simply by rotating the spring tensioner, and it also supports springs of various lengths. Of course, by adjusting the damping force finely by changing shock oil or piston, the optimum setting can be obtained according to various road surface and driving conditions.

The largest capacity in on-road car category, 11.2 mm big bore cylinder has adopted and enable to absorb even small vibration due to run with a resin tire in a drift run from the road surface, then possible to get a maximum grip.

Height adjust system possible to change the car height. Rotund the spring tensioner and suitable for various kinds of shock oil and the piston. to get a damping force with finely adjusted.

Inside of the special gear box that passes drive from the spur gear through the lower side of the motor to the rear. 4 Gear transmission is also suitable for low mu road because the rear traction increases with rotational torque during acceleration. The rear differential is equipped with a 4 pinion gear differential. The axle is made of lightweight aluminum of a new design, by attaching a resin adapter to the universal shaft side, it prevents wear and reduces backlash to increase throttle response.

Rear differential has 4 pinion gear. Fully new design 4 transmission possible squeeze into the bottom of motor, and it is the type to increase the rear traction as revolver goes up, supreme to low friction surface track.

The picture is an assembled reference example. Because of the prototype, it may differ from the actual product. 

Assembly kit 

What you need for running: 2 channel propo set (transmitter / receiver / speed controller / servo), battery (Li-po 2 cell · square short size), charger, 1/10 size drift tire · Wheels, motors, body (for 1/10 size drift), polycarbonate paint 
The kit does not include body, wheels, tires, motor, batteries, pinion gear, and other R / C electrics.
YOKOMO YD2-SXII "SPECIAL EDITION" RED RWD DRIFT CAR KIT YD2 #DP-YD2SX2R

Leading RC Prices Online

RC Part No: #DP-YD2SX2R
RC Brand: YOKOMO
Stock Level: Out Of Stock
RRP: £599.00 Save £49.01

#DP-YD2SX2R Spare Parts & Accessories

#DP-YD2SX2R Product Reviews

Write a review

Note: HTML is not translated!
    Bad           Good
Venue Calendar Garage Sneak Preview Gallery Pre-Owned & Sale Items Gift Vouchers
//Start Facebook//